English
27
A.
Open the bag with label “DMX”.
You will find inside two pieces of heat shrink tube and 7 butt connectors.
B.
Insert the tube
“10”
onto the dmx cable
“11”
on the side of
the rear box of the unit.
C.
Make the connection to the network by using the butt
connectors
“12”
, pressing them with a proper tool
“13”
.
D.
Warm up the tube by using a heater for heat shrink tubes
“14”
till the complete shrinkage.
The connection so obtained features an
IP67
protection rate.
14
12
13
10
11
