English
6
1.0 PACKING
Check carefully the content of the box and in case of damage contact immedia-
tely your forwarder.
The following items are included in the box:
n° 1 instructions leaflet
n° 1 followspot
DARDO 2000TH
2.0 SAFETY
Even if this lantern is fitted with a safety micro-switch which automatically discon-
nect power as soon as the lamp cover is opened,disconnect the lantern from mains
supply before replacing the lamp.
• This followspot has been designed for use in interor. For safety operation, max
ambient temperature must not exceed 50°C.
• Caution: the surface temperature of the followspot can reach 180°C
• Caution: hot lamp; ensure that the lamp is cold before attempting to remove it
(about 10 minutes)
3.0 INSTALLATION
3.1 Fitting lamp
1- A captive screw is fitted on the base of the rear part of the followspot. Unscrew
the knob until it is free and gently pull down the lamp tray. As soon as the lamp
tray is released, the safety switch will automatically disconnect both poles of the
mains supply to the lamp.
2- Clean the lamp with the cleaning towel and fit it carefully in the lampholder.
- avoid to touch the lamp with fingers or dirty towels;
- do not shake the lamp;
3- Fix the lamp to the lampholder;
4- Close the lamp tray.
3.2 Mounting position
The followspot
DARDO 2000TH
can be mounted on a tripod stand; distance from
flammable object must be minimum 1 m.
3.3 Mounting on tripod
Mount the followspot
DARDO 2000TH
on the tripod, tightening the stirrup by the loc-
king knob.
The stirrup is designed to give a smooth and positive up/down movement.
3.4 Electrical connection
1- Connect the supply cable to a plug capable to support a load of at least 16
Amps.
2- Connect the lantern to a mains supply of 230V - 50/60Hz.
