LENS STOP
NOTCHED AREA
FIXTURE JBOX
MOUNTING
SCREWS
Document Description: Installation Instructions for
•
7
6
0
6
3
5
X
X
D
ra
w
in
g
:
D
R
e
v:
1
o
f
3
S
h
e
e
t:
M
A
R
E
n
g
:
4
/2
0
/2
0
0
5
INSTALLATION INSTRUCTIONS
D
a
te
D
ra
w
n
:
MIDBAY
Model:
MIDBAY
Fixture Family:
414-354-6600
1717 West Civic Drive Milwaukee, WI 53209
© Visa Lighting
!
Design Modification Rights Reserved
When using electrical equipment, basic safety precautions should always be followed, including the following:
Read all instructions carefully installing and save for future use.
•
Make sure all connections are in accordance with the National Electrical Code and local regulations.
•
To avoid possible electric shock, be sure the power supply is turned off before servicing or installing the fixture
•
Service should be performed by qualified personnel.
•
These instructions may not cover all details or variations. If additional information is needed, please contact Visa Lighting.
MIDBAY Series Luminaires
PLATE
ACCESS
AGAINST LENS STOPS.
AND SECURING WITH ATTACHMENT NUT
NUT
LENS
FIXTURE
LENS ATTACHMENT
LENS ATTACHMENT, JBOX MOUNTING AND ACCESS
1. ANGLE FIXTURE JBOX THROUGH NOTCHED
AREA IN HOUSING AND SLIDE INTO POSITION
SO THAT JBOX MOUNTING FLANGE IS UNDER
HOUSING EDGE AND SCREW HOLES ARE ALIGNED.
2. ATTACH WITH (4) SCREWS PROVIDED THROUGH
HOUSING INTO JBOX FROM TOP AS SHOWN.
3. REMOVE ACCESS PLATE FOR MOUNTING
AND WIRING BY LOOSENING SCREWS (2),
THEN TURN AND SLIDE PLATE TO THE SIDE.
4. MOUNT AND WIRE PER PAGE 2 AND 3.
5. LENS IS ATTACHED BY LIFTING INTO FIXTURE
MOUNTING LEGS THROUGH HOLES IN BRACKET.
WIREGUARD MOUNTING
AND ATTACHING WITH (2) MOUNTING SCREWS.
NUT
MOUNTING
WIREGUARD
SCREWS
MOUNTING
BRACKET
FIXTURE
WIREGUARD
WIREGUARD
BRACKET
3. LIFT WIREGUARD AROUND FIXTURE AND INSERT
ATTACH WITH 3 ADDITIONAL NUTS.
1. INSTALL ONE NUT ONTO EACH MOUNTING
LEG OF WIREGUARD (3 PLACES). TURN NUT TO
THE END OF THE THREADS.
2. ASSEMBLE WIREGUARD BRACKETS TO
FIXTURE BY INSERTING INTO SLOT ON HOUSING
MOUNTING
LEG
