background image

 1

ALRA-ALRB-C91 

Installation Instructions 

ERP: IIS00271 

NOTES 



Installation should be completed by an individual familiar with the construction and operation of the luminaire. 



Installation of luminaire must be in accordance with national and local building and electrical codes. 



Carefully read and follow all warnings and instructions before installing or servicing the luminaire. 



Instructions do not cover all details and all possible product configurations. 



Do not restrict luminaire ventilation. 



Ensure LED luminaire is not covered with material that will prevent convection or conduction cooling. 



Do not exceed luminaire’s maximum ambient temperature. 



Ensure LED luminaire has the correct polarity before installation. 



These products have maximum rated output voltage that exceeds the voltage limits that cannot be accessible based on voltage restrictions for 

Class 2 circuits in Canadian Electrical Code. This output complies with the definition of Class 2 per Canadian Electrical Code. This product com-

plies with this requirement since the installation instruction requires installation in restricted access area. 



Do not mount the luminaire to ceiling if convenience outlet option is provided. 



Do not use the luminaire housing as junction box cover unless the housing width is wider than the junction box. 

WARNINGS 

Electric shock: 



Disconnect or turn off power before installing or servicing luminaire. 



All electrical wiring to be completed by a qualified licensed electrician 

in accordance with local and National/Canadian Electrical Code. 



Ensure supply voltage corresponds with the correct ballast/driver 

voltage. 



Avoid exposing wiring to metal edges and sharp objects. 



Ensure that the luminaire is properly grounded to prevent electric 

hazards. 

 

 

Fire: 



Keep flammable and combustible materials away from the light source 

and/or lens. 



Use correctly rated supply conductors as indicated by product label-

ing. 

Burn: 



Allow luminaire to cool before handling luminaire. 

Personal Injury: 



Wear safety glasses and gloves when handling the luminaire to avoid 

physical injury. 



Avoid direct eye contact with light source. 



Always support the weight of the luminaire. 

Viscor is not responsible for any injuries due to the improper installation or handling of its products. 

01/21/2020-Rev1.0 

 C91 - Stand alone unit with two flat finished ends. (power feed, canopies & aircraft cables included) 

 M56 - Start unit of configurable lighting system with one flat finished end and one open end.  

 M57 - Middle unit of configurable lighting system with two open ends. 

 M58 - End unit of configurable lighting system with one flat finished end and one open end. 

S-connector 

L-connector 

T-connector 

X-connector 

Fixture/Housing Construction 

Configurable Lighting System Connectors 

Reviews: