Preparing Patches for Organelle™
•
[send screenLine1]
– Outgoing messages that set the first line of Organelle’s display
after the level meters (usually, this line displays the status of Knob 1); any message
type will be accepted (including list and symbol)
•
[send screenLine2]
– Outgoing messages that set the second line of Organelle’s
display after the level meters (usually, this line displays the status of Knob 2); any
message type will be accepted (including list and symbol)
•
[send screenLine3]
– Outgoing messages that set the first line of Organelle’s display
after the level meters (usually, this line displays the status of Knob 3); any message
type will be accepted (including list and symbol)
•
[send screenLine4]
– Outgoing messages that set the first line of Organelle’s display
after the level meters (usually, this line displays the status of Knob 4); any message
type will be accepted (including list and symbol)
•
[send screenLine5]
– Outgoing messages that set the first line of Organelle’s display
after the level meters (usually, this line displays the status of the Aux button and any
function under its control); any message type will be accepted (including list and
symbol)
•
[send led]
– Outgoing messages that set the status of the Aux button’s LED;
0
(zero)
triggers off,
1
triggers red,
2
triggers yellow,
3
triggers green,
4
triggers teal,
5
triggers
blue,
6
triggers purple,
7
triggers white
•
[throw~ outL]
– Outgoing signal that will be passed to the hardware’s left audio
output; should be an audio signal in the standard range of
-1
to
+1
•
[throw~ outR]
– Outgoing signal that will be passed to the hardware’s right audio
output; should be an audio signal in the standard range of
-1
to
+1
A patch that is prepared to exchange these various messages/signals with Organelle is
“fully compatible,” but there is no requirement that you use or even include all of these
Page
!
of
!
38
51