To Re-Enable Remote Tones:
Follow step 1 above. The unit will automatically switch out of silent mode and beep 5 times/LED flashes 5 times
for confirmation.
LCD PAGER / REMOTE: ICONS & TEXT
FUNCTION ICON/SYMBOL TEXT
Arm System
Downward Arrow
ARM
Disarm System
Upward Arrow
DISARM
Remote Start
Engine Icon Spins
ENGINE RUN
Stop Engine
Engine Icon Stops/Disappears
OFF
Trunk Pop
Trunk Opens on Car
TRUNK
Hood/Trunk Alarm Trigger
NONE
HOOD
Door Alarm Trigger
Door Opens on Car
DOOR
Sensor Pre-Warn
Blinking Hammer
WARN
Sensor Trigger
Hammer/Breaking Glass
SHOCK
Out of Range
Blank Cursor
None
Miscommunication
Blank Cursor
None
Low Battery
Battery Icon
None
Valet
V Symbol
VALET
Alarm Clock
Alarm Clock
None
Remote Start Timer
O.K
None
In-car Page
Blinking CALL
None
Silent Mode
Siren w/Slash
None
Press and release button (II) to reset the current alert or activate the LCD screen back lighting.
**IMPORTANT NOTES**
1. This unit will remote start whether the alarm is on or off. Starting the engine will not trigger the alarm system if it
is in the armed mode when performing a remote start.
2. The vehicle will still be protected when armed/remote started. If a door/hood/trunk is opened, the alarm will
trigger and the engine will shut down automatically.
3. Quickly pressing button 3 will reset any active message icons on the LCD display.
4. If the alarm is triggered by opening the hood, the LCD Display will show and page as a trunk violation. The LCD
remote does not have a separate Hood-Opening Icon.
5. The control module may not respond to multiple commands. You must allow up to 8 seconds between functions
because the unit is sending/paging information to remote/pager.