will need to go through the brake/override/button (II) procedure again. The LED will flash in a 4-ON, 4-OFF sequence
when the Cold Self-Start Mode has been set regardless of whether the alarm system is armed or not.
TO CANCEL THE COLD SELF-START MODE: Start the vehicle using the remote or tap the brake pedal.
REMOTE START OPERATION
ANTI-GRIND / STARTER DISABLE (Optional)
Prevents the user from accidentally grinding the starter if the Ignition key is turned too far to the start position while
engine is already running from the remote starter. Starter circuit is automatically disabled when alarm is armed to
protect the vehicle from “Hot Wiring”.
HOOD OPEN & BRAKE PEDAL SAFETY CIRCUITRY
Both the hood pin and brake switch will prevent the engine from being remote started. Both circuits will also cause a
remote started engine to shut down if activated while running. This helps eliminate the risk of injury to someone
working under the hood or tampering of the vehicle. If a Remote start is requested with the hood/brake active, the
lights will flash twice and the unit will not attempt a start.
CLOCK / TIMED FEATURE OPERATION
Clock Setting:
1. Press and hold buttons (II) & (III) together until 2 beeps are heard. LCD will display the word “CLOCK”
2. Release Buttons (II) & (III).
3. Observe the time display on the LCD screen and press the (II) button to set the hour, Press the (III) button the set
minutes.
4. When the correct time is displayed, press the (I) button to set and confirm the current time of day. The remote will
emit a congratulation song and the correct time of day will appear at the top of the LCD screen.
Alarm Clock Setting:
1. Press and hold buttons (II) & (III) together for the following sequence: [2 beeps]-[3 beeps]. If done correctly, the
Alarm Clock Icon will appear.
2. Release Buttons (II) & (III).
3. Observe the time display on the top of the LCD screen and press the (II) button to set the Hour, Press the (III)
button the set minutes for any desired alarm time.
4. Press the (I) button to set and confirm the alarm time. The remote will emit a congratulation song and an alarm
clock icon will display under the time of day on the LCD screen as an indicator the alarm has been set.
Note:
Alarm clock sounds one time for each setting.
Follow steps 1, 2, and 3 to reset alarm for a new time or follow
steps 1 & 3 only to set alarm for same time again.
To cancel an alarm that has already been set:
