background image

CrimeStopper

Press & release side

button, then you have

4 seconds to

control vehicle #2.

Press & hold side button

for 2 seconds.  The remote

will beep and "2" icon will

appear on  LCD screen.

"Sidekick"

VEHICLE #2 CONTROL:

Remote

  FIXED
ANTENNA

LED

Flashes

 

 
 

2 VEHICLE OPERATION 

 

 
2 VEHICLE CONTROL 

Your CS-2014FM remotes have the ability to control a second vehicle with a Crimestopper CS-2014FM 
system installed. 

 

To set up the 2-Vehicle operation you 
must first program your remotes to 
Vehicle #2.  Follow the “Transmitter 
Programming” steps (Pg. 14) at the 
second vehicle and learn YOUR remote, 
along with vehicle #2’s existing remotes. 

 

2-VEHCLE OPERATION NOTES: 

(1) You do not have to switch between 
Vehicle I and II to get pages from each 
vehicle.  Your remote pager will receive 
pages from both cars regardless of 
which vehicle the pager is set to.  The “1” 
or “2” icon will always display with each 
page indicate which vehicle the page 
originated from. 

 

(2) When programming CS-2014FM 
systems, all remote/pagers and sidekick 
remotes for that vehicle must be learned 
at the time of programming.  When you 
program your remote at the second 
vehicle, that vehicle’s original remote 
must also be programmed.  Your remote 
should be set in Vehicle  “2” and the 
vehicle’s original remote should be set in 
Vehicle “1”. 

 
 
 
 
 
 

16 

Summary of Contents for Super Page V CS-2014TW2





















Reviews: