M5 16/32/48/60-M-A/E-O
Created on 4/14/2011 8:18:00 AM
11
BEGIN SERIAL NO. 09010131
5.
Disposable filters should be checked weekly and should be discarded and replaced once
filters begin to become saturated but before grease starts to drip.
6.
Ventless hood filters need to be cleaned and replaced regularly, see manual for
recommended schedule and procedures. Care and caution needs to be taken when
cleaning filters as to not damage them, especially the electrostatic filter
Cretors’ elevator corn storage option
Elevator
I
THEORY AND OBSERVATIONS OF MACHINE OPERATION
The elevating corn storage option is designed to allow operators to easily adjust the level of
popped corn in the heated storage bin for easy access. The cabinet is provided with a
cornditioning system which circulates heated air to keep popcorn warm and crisp. The
handle on the outside of the unit is easily turned to raise or lower the poppercase bottom
height. This reduces corn breakage and eliminates the need for the operator to reach down
into the storage area when the level of popped corn is dropped. The handle may be
replaced by a switch if equipped with the motorized elevator option.
II
CONTROL SWITCH
TOGGLE SWITCH
-Raises and lowers the bin height (motorized model only)
III
OPERATING INSTRUCTIONS
1.
The height of the bin should be adjusted to the level to hold the amount of corn
popped in the cabinet to maximize the efficiency of the cornditioning system.
2.
The bin level is lowered by pulling and holding out the knob handle while turning
the handle clockwise. It is raised by turning counter-clockwise. The bin level can
be “locked in position” by releasing the knob handle so that the pin will rest against
the underside of the frame. One revolution will raise or lower the bin level by
approximately 4 inches.
3.
If equipped with the motorized option, the bin level is adjusted by pressing down
on the elevator switch to lower and up to raise.
