M5 16/32/48/60-M-A/E-O
Created on 4/14/2011 8:18:00 AM
10
BEGIN SERIAL NO. 09010131
than ¾” high of water inside the kettle. If the kettle has been overheated or oils that
tend to carbonize are used the normal cleaning procedures may not suffice. Increase
frequency as needed.
Cretors has developed a cleaning kit for your Mach 5 machine. The kit is sold separately
under P/N 10837. If you need more information, please feel free to contact your local
distributor or call Cretors at 1-800-228-1885.
6.
Cretors Outside Kettle Cleaner COC should be used periodically to remove popping oil
that may become baked on to the outside of the kettle.
7.
The kettle agitator assembly should be removed weekly for thorough cleaning. The
stirrer blade is disassembled by removing the spring pin that goes through the top of
the stirrer blade. Lift off the stirrer blade.
8.
Clean all parts thoroughly, making sure to use CKC. Do not use any harsh abrasives or
cleaning materials. Clean the interior of the kettle every week with "CKC" cleaning
compound. This will prevent the accumulation of carbon on the bottom and internal
sides of the kettle. When using "CKC" cleaning compound in the kettle, do not fill the
kettle with more than 3/4" high of water inside the kettle. Heat the water to boiling and
turn off the kettle heat, don't boil the kettle dry. If the kettle has been overheated or oils
that tend to carbonize are used, the normal cleaning procedures may not suffice.
Increase frequency as needed.
9.
There are two new Cretors cleaners. Carbon OFF in the blue can is to be used with no
heat and the red would require the kettle to be heated. Read the directions on the cans.
10.
Reassemble in reverse order, following the directions given.
B.
Cabinet
1.
Remove and empty the waste clean-out drawer daily or whenever it is full. Under
heavy use this may need to be done more often.
Failure to empty the drawer and clean cabinet may result in a fire hazard due to
restricted air flow.
2.
The cabinet glass and cabinet base can be cleaned with any good grade glass or
household cleaner suitable for glass and plastic surfaces. The inside of the cabinet can
be cleaned with the same cleaner as the outside, if it is the type that has a cleaning agent
to cut the oil remaining from the popping operation, and it is acceptable for food contact
surfaces. Do not soak unit with water. Avoid wetting of inside of electrical enclosure.
3.
The doors can be cleaned with Cretors’ Plastic Polish. This product is specially
formulated to clean plastic doors. Do not use cleaners that have ammonia or alcohol.
The use of these cleaners will cause the doors to become brittle and crack.
4.
Counter model Mach 5s require the installation of 4” legs, which are included with this
unit. The use of the 4” legs is to conform to food sanitation regulations.
