EG20/32/48/60-M-A/E-S
Last printed 9/10/2007 1:56:00 PM
6
BEGIN SERIAL NO: 00035540
VI.
INSTALLATION INSTRUCTIONS
A.
Location
Choose a location for your Cretors popcorn machine that maximizes the ease of
operation and maintenance procedures. Giant pedestal popcorn machines are
designed to be installed on the customers counter or custom design cabinet.
OEM option machines are supplied with components that permit them to be
installed into a user’s cabinet and control the cornditioner, lights and exhaust in
the cabinet (see details below). Be sure to check your local building and fire
codes for location restrictions.
B.
Power Supply
1.
Check the nameplate to determine the required power supply.
Connect your popcorn popper only to the correct power source. Failure
to do so may result in personal injury or death and may damage your
popper.
2.
C. Cretors and Company recommends dedicated circuits for the Giant
model popcorn machine. The Giant model poppers require a dedicated
circuit to avoid a voltage drop in the supply wiring. Check your local
electrical codes regarding fuse or circuit breaker requirements.
Make certain your popcorn machine is properly grounded. Failure to do
so may result in damage to your equipment or present a shock hazard.
C.
Connecting Machine to Power Supply
1.
Make certain that power supply circuit breakers are in the off position.
2.
Locate the pedestal and bolt it down securely using the four bolt holes
provided in the base of the pedestal.
3.
Power should be connected through one of the four large holes in the base
of the pedestal.
4.
The electrical connection is made to the terminal strip, located to the right
of the main switch.
