DI20/32-M-A/E-S
Created 11/17/2016 2:29 PM
3
BEGINNING SERIAL NUMBE 07093822
I. SAFETY ALERT SYMBOL
The symbol shown below is used to call your attention to instructions concerning your personal safety
and the safety of others. Watch for this symbol. It points out important safety precautions and
procedures. It means
ATTENTION
!
Become Alert
!
Your personal safety is at risk!
Read the
message that follows and be alert to the risk of personal injury or death.
II.
SAFETY FIRST
The information in this manual is essential for safe installation and service of your
Cretors popcorn machine. The manual must be read and understood before
installing, or maintaining equipment, or equivalent training must be provided.
“The employer must instruct each employee in the recognition and avoidance of
unsafe conditions, regulations applicable to his work environment to control and
eliminate any hazards or other exposure to illness or injury.”
Ref.: 29 CFR 1926.20 (b)(4)(a)(2)
It is understood that safety rules within individual companies vary. If a conflict
exists between the safety procedures contained in this manual and the rules of a
using company, the more stringent rule should take precedence.
The purpose of equipotential bonding studs, terminals and systems is to join
together the metalwork in a product, whether it needs to be grounded or not, so
every point is at the same potential/voltage. This bonding is not intended to
provide grounding (a separate low resistance ground-fault current path back to the
source).
III. INTRODUCTION
This manual is filled with timesaving and money-saving information regarding your Cretors popcorn
machine. There is nothing, however, more important than the safety aids and warnings that are found
throughout this document. The Safety Alert Symbol is used to identify topics of primary safety
concern wherever they appear. A separate section has been included which deals exclusively with
operation and accident prevention.
If, after reviewing this manual, anything is unclear or technical problems are encountered, contact the
distributor from whom you purchased your machine. For assistance and if there are any additional
questions, feel free to contact our Customer Service Department at the address and/or phone number
listed on the last page of this manual. Always have the model and serial number of your machine
available to assist in obtaining the correct information.
Summary of Contents for DIPLOMAT 20
Page 22: ...DI20 32 M A E S Created 11 17 2016 2 29 PM 4 BEGINNING SERIAL NUMBE 07093822 ...
Page 54: ......
Page 55: ......
Page 56: ......