background image

8.4” TableTop WiFi Touch Screen 

 

Crestron 

TPMC-8T-GA

 

48  

  8.4” TableTop WiFi Touch Screen: TPMC-8T-GA 

Operations Guide – DOC. 7262F 

Return and Warranty Policies 

Merchandise Returns / Repair Service 

1.

 

No merchandise may be returned for credit, exchange or service without prior authorization from 

Crestron. To obtain warranty service for Crestron products, contact an authorized Crestron dealer. 

Only authorized Crestron dealers may contact the factory and request an RMA (Return 

Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name 

and phone number of contact person, RMA number and return address. 

2.

 

Products may be returned for credit, exchange or service with a Crestron Return Merchandise 

Authorization (RMA) number. Authorized returns must be shipped freight prepaid to Crestron,  

6 Volvo Drive, Rockleigh, N.J. or its authorized subsidiaries, with RMA number clearly marked 

on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall 

be subject to refusal. Crestron reserves the right in its sole and absolute discretion to charge a 15% 

restocking fee plus shipping costs on any products returned with an RMA. 

3.

 

Return freight charges following repair of items under warranty shall be paid by Crestron, 

shipping by standard ground carrier. In the event repairs are found to be non-warranty, return 

freight costs shall be paid by the purchaser. 

Crestron Limited Warranty 

Crestron Electronics, Inc. warrants its products to be free from manufacturing defects in materials and 

workmanship under normal use for a period of three (3) years from the date of purchase from Crestron, 

with the following exceptions: disk drives and any other moving or rotating mechanical parts, pan/tilt heads 

and power supplies are covered for a period of one (1) year; touch screen display and overlay components 

are covered for 90 days; batteries and incandescent lamps are not covered. 
This warranty extends to products purchased directly from Crestron or an authorized Crestron dealer. 

Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if any. 
Crestron shall not be liable to honor the terms of this warranty if the product has been used in any 

application other than that for which it was intended or if it has been subjected to misuse, accidental 

damage, modification or improper installation procedures. Furthermore, this warranty does not cover any 

product that has had the serial number altered, defaced or removed. 
This warranty shall be the sole and exclusive remedy to the original purchaser. In no event shall Crestron 

be liable for incidental or consequential damages of any kind (property or economic damages inclusive) 

arising from the sale or use of this equipment. Crestron is not liable for any claim made by a third party or 

made by the purchaser for a third party. 
Crestron shall, at its option, repair or replace any product found defective, without charge for parts or labor. 

Repaired or replaced equipment and parts supplied under this warranty shall be covered only by the 

unexpired portion of the warranty. 
Except as expressly set forth in this warranty, Crestron makes no other warranties, expressed or implied, 

nor authorizes any other party to offer any warranty, including any implied warranties of merchantability or 

fitness for a particular purpose. Any implied warranties that may be imposed by law are limited to the terms 

of this limited warranty. This warranty statement supersedes all previous warranties. 
 

 

Crestron software, including without limitation, product development software and product operating system software is licensed 

to Crestron dealers and Crestron Service Providers (CSPs) under a limited non-exclusive, non-transferable license pursuant to a 

separate end-user license agreement. The terms of this end user license agreement can be found at 

www.crestron.com/legal/software_license_agreement

Summary of Contents for TPMC-8T-GA

























































Reviews: