Crestron
ST-VC
Volume Control Module
Leading Specifications of the ST-VC
SPECIFICATION
DETAILS
Power Requirements
12VDC external power pack or
24VDC, 0.25A, 6W - network
Default NET ID
10
Crestron Application Builder
TM
Version 1.0.9 or later
1 & 2
Crestron Application Builder
TM
Templates
Version 1.4 or later
2
SIMPL
TM
Windows
®
Version 1.40.07 or later
2
Crestron Database
Version 12.1.4 or later for SmarTouch Wizard
support or 12.1.3 for regular support
2
2-Series Control System Update
3
Version C2-1008 or later
4
CNMSX-AV/PRO Upgrade File
Version 5.10.11x or later
5
CNRACKX/-DP Upgrade File
Version 5.10.11w or later
5
CEN/CN-TVAV Update File
Version 5.12.05v or later
5
ST-CP Update File
Version 4.01.00s or later
5
Dimensions & Weight
Height: 1.70 in (4.31 cm)
Width: 7.07 in (17.95 cm)
Depth: 6.32 in (16.06 cm)
Weight: 2.20 lb (1.00 kg)
1
This product is supported in the Crestron Application Builder Software, both in the Residential and
Commercial versions. Contact Crestron Customer Service for licensing details.
2
The latest software versions can be obtained from the Downloads section of the Crestron website
(
. New users are required to register in order to obtain access to the FTP site.
3
Crestron 2-Series control systems include the AV2, AV2 with Card Cage, CP2, CP2E, PAC2, PRO2,
and RACK2.
4
Filenames for 2-Series control system update files have a CUZ extension and can be obtained from
the Downloads section of the Crestron website.
5
CNX upgrade files are required for either CNMSX-AV/Pro or CNRACKX/-DP. Filenames for CNX
upgrade files have a UPZ extension and ST-CP files are in one EXE or zipped UPZ file. All can be
obtained from the Downloads s
ection of the Crestron website.
Update files are
specifically designed for certain control systems. If an update file is loaded into a control system
other than the device for which it was intended, it may lockup the control system, which would then
have to be returned to Crestron. Update files with an "
S
" designator are for the ST-CP, "
V
"
designator for CEN/CN-TVAV, "
W
" for CNRACKX-DP, and "
X
" for CNMSX-AV/Pro control
systems. Control systems are able to recognize and reject incorrect update files. However, when
updating control systems, do not ignore Crestron Viewport warning prompts or messages.
Volume Specifications of the ST-VC (Per Channel)
SPECIFICATION
DETAILS
Input Impedance
10K or 600 Ohms
Output Impedance
10 Ohms
Input
Balanced or Unbalanced
Output
Balanced or Unbalanced
Total Harmonic Distortion (THD)
-85 dB
Hum and Noise (ref. 0 Dbv)
-85 dB
Maximum Input Level (Flat Mode)
4V rms
Channel Separation
-90 dB
Attenuation Range (Excluding Mute)
0 to -76 dB (maximum)
Mute
-104 dB
Frequency Response
8 Hz to 60 KHz (-3 dB minimum)
NOTE:
A chassis GND screw is provided in the back of the unit to ground the
ST-VC to the amplifier and audio source common ground.
Operations Guide - DOC. 5676A
Volume Control Module: ST-VC
•
5
