Volume Control Module
Crestron
ST-VC
Tone Specifications of the ST-VC (Per Channel)
SPECIFICATION
DETAILS
Flatness (8 to 60 KHz flat mode)
+/- 0.2 dB
Bass Gain Range (100 Hz)
+/- 12 dB
Bass Step Size (100 Hz)
2 dB
Treble Gain Range (10 KHz)
+/- 12 dB
Treble Step Size (10 KHz)
2 dB
As of the date of manufacture, the Volume Control Module has been tested and
found to comply with specifications for CE marking and Australian Compliance
Mark.
NOTE:
These devices comply with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) these devices may not cause harmful interference,
and (2) these devices must accept any interference received, including interference
that may cause undesired operation.
Setup
Preparation for Use
Refer to the two hookup diagrams that follow this paragraph. The first diagram
illustrates the connections to SmarTouch STS. The second diagram showns
connections to the Cresnet system. Complete the connections in any order,
regardless of whether the ST-VC is part of SmarTouch STS or the Cresnet system.
SmarTouch STS Hookup Connections for ST-VC
AMPLIFIER
NOTE:
USE 2 FOOT SUPPLIED CABLE (CA15717)
TO CONNECT ST-VC TO SMARTOUCH STS.
A/V
EQUIPMENT
AMPLIFIER &
AUDIO SOURCE
COMMON GND
DAISY CHAIN
TO EXPAND
POWER PACK
(500 mA)
(1000 mA
for STI-VC)
INPUT
SMARTOUCH STS
AUDIO OUT
6
•
Volume Control Module: ST-VC
Operations Guide - DOC. 5676A
