3-Series Room Media Controller
Crestron
RMC3
Configure for Operations
Before setting up the RMC3, the time and time zone need to be set.
The RMC3 can also be further configured using a web browser.
Set Date and Time
1.
Establish communication with the RMC3 as described in
“Establishing Communication” on page 21.
2.
In Crestron Toolbox, select
Functions
|
System Clock…
.
3.
Set the date and time.
Online Configuration
The RMC3 can be configured using the built-in web-based setup tool.
1.
Using Internet Explorer, navigate to http://xxx.xx.xx.xxx/setup
where xxx.xx.xx.xxx is the IP address of the control system.
NOTE:
The web-based setup tool is only accessible from Internet
Explorer.
NOTE:
If a security warning is displayed, click
Install
to
continue.
The control system’s splash screen is displayed.
24
Room Media Controller: RMC3
Operations & Installation Guide – DOC. 7558B
