background image

Crestron 

RMC3 

 

3-Series Room Media Controller

 

3-Series Control Systems 

The IP based 3-Series platform is engineered from the ground up to 
deliver a network-grade server appliance capable of faithfully handling 
everything from lighting and AV system control to total building 
management. 
Crestron 3-Series embodies a distinctively robust, dynamic, and secure 
platform to elevate system designs to higher levels of performance and 
reliability. Compared to other control systems, Crestron 3-Series provides 
a pronounced increase in processing power and speed with more 
memory, rock solid networking and IP control, and a unique modular 
programming architecture. 

Modular Programming Architecture 

Designed for enhanced scalability, the RMC3 affords high-speed,  
real-time multitasking to seamlessly run multiple programs 
simultaneously. This exclusive modular programming architecture 
(MPA)* lets programmers independently develop and run device-specific 
programs for lighting, shades, HVAC, security, AV, etc., allowing for the 
optimization of each program and for changes to be made to one program 
without affecting the whole. Even as a system grows, processing 
resources can easily be shifted from one 3-Series processor to another 
without rewriting any code. The end benefit is dramatically simplified 
upgradability with minimal downtime, whether implementing changes on 
site or remotely via the network. 

Robust Ethernet and IP Control 

High-speed Ethernet connectivity enables integration with IP-controllable 
devices and allows the RMC3 to be part of a larger managed control 
network. Whether residing on a sensitive corporate LAN, a home 
network, or accessing the Internet through a cable modem, the RMC3 
provides secure, reliable interconnectivity with IP-enabled touch screens, 
computers, mobile devices, video displays, media servers, security 
systems, lighting, HVAC, and other equipment—whether on premises or 
across the globe. 
 

*  To enable modular programming architecture on the RMC3 requires the purchase 

of one SW-RMC3-10PROG license. The license enables support for running up 
to 10 simultaneous programs on a single RMC3. The license is not required if 
running only one program on the RMC3. 

Operations & Installation Guide – DOC. 7558B 

Room Media Controller: RMC3  

  3 

Summary of Contents for RMC3





































Reviews: