Crestron
HD-MD8X1/HD-MD8X2
QuickSwitch HD HDMI Switcher
Operation
Operating Modes
The HD-MD8X1/2 can operate in the
Sync
,
View
, or
Route
mode.
Sync Mode
The
Sync
mode uses the front panel controls to view the presence of video signals on
each input. Press the
SYNC
button to activate the
Sync
mode. The
SYNC
LED lights
as well as the LEDs of any inputs with a video signal present.
View Mode
The
View
mode uses the front panel controls to view routing information for inputs
and output(s).
Routing information for audio, video, and USB portions of an input can be viewed
independently. For more information, refer to “
Route Mode
The
Route
mode uses the front panel controls to route input signals to output(s).
Press the
ROUTE
button to activate the
Route
mode.
When in the
Route
mode, pressing an input button shows the output(s) that
are connected to the input.
Audio and video portions of an input can be routed independently. For more
information, refer to “
View
Mode
Use the
View
mode to view routing information for inputs and output(s). To select
the
View
mode, press the
VIEW
button. The
VIEW
LED lights.
View Source Routing
1.
Press an input signal button to display the output(s) that are connected to it.
2.
Press
A
or
V
to see where the audio or video portion of an input signal is
routed.
View Output Routing
1.
Press an output signal button to display the input signal that is connected.
NOTE:
If the other output on an HD-MD8X2 is connected to the same
input, its LED also lights.
2.
Press
A
or
V
to see the input that is providing the audio or video portion of
the output signal.
Operations & Installation Guide – DOC. 6714B
QuickSwitch HD HDMI Switcher: HD-MD8X1/HD-MD8X2
21
