Crestron
QM-FTDC
FlipTop Data Center
NOTE:
Ensure that the cables have sufficient clearance to enable smooth
movement. Allow approximately 40 inches (102 cm) from the top surface of the
FlipTop box.
Mounting to Surface
The QM-FTDC is designed to mount in a horizontal surface, such as a desk top,
lectern or podium. The following diagram illustrates the required opening size to
accommodate the QM-FTDC. A cutout template (4006405 or 4006874) is included.
Cutout Dimensions
QM-FTDC (4006405)
QMI-FTDC (4006874)
5.32 in
(5 5/16 in)
(13.50 cm)
8.13 in
(8 1/8 in)
(20.64 cm)
6.25 in
(6 1/4 in)
(15.88 cm)
Radius
0.13 in
(1/8 in)
(0.32 cm max)
Radius
0.13 in
(1/8 in)
(0.32 cm max)
6.38 in
(6 3/8 in)
(16.20 cm)
NOTE:
Before inserting the QM-FTDC in the mounting hole, ensure that all
required cables have been installed.
Mounting Parts Supplied with the QM-FTDC
PART DESCRIPTION
QUANTITY
Screw #6-32, Pan Head, Phillips
4
Screw #10, Pan Head, Phillips
4
Mounting Bracket
2
1. Install the four supplied #6-32 screws, but do not tighten (four on the front
and four on the rear, which are already installed). These will be used to
secure the front and rear mounting brackets.
2. Position the QM-FTDC in the mounting hole.
Operations & Installation Guide – DOC. 6312B
FlipTop Data Center: QM-FTDC
•
21
