FlipTop Data Center
Crestron
QM-FTDC
Connectors, Controls & Indicators (Continued)
#
CONNECTORS
1
,
CONTROLS &
INDICATORS
DESCRIPTION
9
LAN
8
1
(1) 8-pin RJ-45 female, Ethernet LAN pass-
through jack for connection to Ethernet,
providing local area network or Web access
(cable not included)
PIN
SIGNALS
1
TD+
2
TD-
3
RD+
4
Connected to pin 5
5
Connected to pin 4
6
RD-
7
Connected to pin 8
8
Connected to pin 7
10
(QM)
125 V
(1) 6 foot grounded AC line cord
Passes through to front panel AC power
outlet
10
(QMI)
MAX 250 V
(1) IEC socket
Passes through to front panel AC power
outlet
11
NET
Four-position terminal block connector for
data and power. Connects to Cresnet control
network.
Pin 1 (24) Power
Pin 2 (Y)
Data
Pin 3 (Z)
Data
Pin 4 (G)
Ground
12
SETUP LED &
BUTTON
(1) red LED and miniature pushbutton, used
for touch-settable ID (TSID)
Used for setting network ID during initial
configuration or when the device is being
added/replaced.
13
PHONE (1 – 3)
1
2
3
(1) 8-pin RJ-45 female Ethernet LAN pass-
through
(2) 6-pin RJ-11 female, telephone pass-
through jacks
Use the label set (included) to change the
designation of these ports (bottom labels should
match top labels)
(Continued on following page)
12
•
FlipTop Data Center: QM-FTDC
Operations & Installation Guide – DOC. 6312B
