Crestron PC-350V Series, Product Manual

Page: 46 / 69

Product Manual — Doc. 9212A PC-350V-12 and PC-350V-18 • 46
a. Select the desired Day of Week and Time of Day (24-hour format) values.
b. Set the Poll Interval by entering a value from 60 to 65535 minutes. A value of 0
disables the Poll Interval.
4. Click Save Changes.
Clicking Update Now causes the firmware to be updated at the current time; however, the
schedule that is set in step 3 above remains in effect.
Date/Time
Use the Date/Time drop-down menu to configure the date and time settings of the power
controller.
Time Synchronization
1. Move the Time Synchronization slider to specify whether time synchronization will be
enabled (right) or disabled (left). By default, time synchronization is enabled.
2. In the NTP Time Servers, enter the URL of the NTP or SNTP server.
3. Click Synchronize Now to perform time synchronization between the device's internal
clock and the time server.
Time Configuration
1. Click on the Time Zone drop-down menu to select the applicable time zone.
2. In the Date field, enter the current date.
3. In the Time (24hr Format) field, enter the current time in 24-hour format.
Click the Save Changes button to save the settings.
Click Revert from the Actions drop-down menu to revert to the previous settings without saving.
Control System
Move the Encrypt Connection slider to specify whether the encryption will be enabled (right) or
disabled (left). By default, Encrypt Connection is disabled.