background image

Professional Automation Mini Computer 

 

Crestron 

PAC2M

 

Professional Automation Mini Control System 

The PAC2M is a compact, low-cost alternative to the PAC2 designed for small 
lighting and automation applications. At half the size of a PAC2, the PAC2M is 
perfect for apartments and smaller homes as well as individual meeting rooms and 
lecture halls. 

2-Series Engine 

Built upon Creston’s reliable 2-Series control engine, the PAC2M is extensively 
programmable using Creston’s suite of powerful development software and vast 
database of drivers and software modules. The PAC2M works seamlessly with 
Crestron’s entire line of lighting dimmers and shade controls, keypads and 
touchpanels, thermostats, wireless gateways, control cards and expansion modules. 
At the heart of the PAC2M is the powerful 32-bit Freescale ColdFire

® 

processor. 

Crestron's exclusive enhanced real-time operating system makes the PAC2M one of 
the fastest, most reliable control systems available.

 

Whole House Integration 

The PAC2M provides for the integration of non-Crestron devices and subsystems 
through a host of control interfaces. Four isolated relays and four digital input ports 
are built in to accommodate motion sensors, contactors, door strikes and other low-
voltage controls. Additional relays, I/O ports, serial COM ports, DTMF interfaces 
and shade controllers can be added using Crestron expansion modules at any location 
throughout a residence or commercial facility. 

Modular Enclosure Installation 

The PAC2M is designed to install in a CAEN automation enclosure and provide a 
direct bus to a cabinet full of CLX-(or CLXI-)Series lighting control modules. It is 
also suitable for surface mount installation without an enclosure where allowed. 
Every Crestron lighting system is completely modular and scalable, allowing 
virtually unlimited configuration and expansion flexibility. 

Cresnet

® 

Distribution 

Cresnet is the communications backbone for many Crestron lighting modules, wall 
box dimmers, thermostats, keypads and many other devices. This flexible 4-wire bus 
streamlines the wiring of a complete Crestron lighting system. The PAC2M provides 
connectivity for numerous Cresnet devices on multiple homeruns via eight separate 
Cresnet ports. Its built-in Cresnet hub provides two isolated segments, each 
supporting 3000 feet of cabling and approximately 25 Cresnet devices. The Cresnet 
ports are arranged into two separate power groups providing a clean, flexible 24 Volt 
DC power distribution solution. An external power supply is required (sold 
separately). 

Ethernet and e-Control

®

Built-in 10/100 Ethernet facilitates secure high-speed network connectivity, enabling 
extensive capabilities for remote system maintenance and control and providing an 
interface to other Crestron control systems. Native features include a built-in email 
client to report system troubles and other functions to the homeowner or service 
company via instant email notification. An onboard Web server provides the 
foundation for Crestron’s exclusive e-Control 2 Xpanel technology, providing secure 
IP-based remote control using any Windows

®

 computer or CD/PocketPC™ PDA 

device. 

2  

  Professional Automation Mini Computer: PAC2M 

Operations Guide – DOC. 6507 

Summary of Contents for PAC2M

































Reviews: