Crestron n TPMC-12 Operation Manual Download Page 28

Page: 28 / 70

Isys

12” Tilt Touch Screen

Crestron

TPMC-12

NOTE:

If there is a mapped network drive on the touch screen, the first time you

select

Browse

, it may take some time for the “Open” window to appear.

NOTE:

When selecting

Browse

, the contents of the “Recent” folder will not be

available.

NOTE:

Projects can also be loaded via Crestron Toolbox.

NOTE:

External

is checked, the display list cannot be viewed via Crestron

Toolbox.

NOTE:

When loading a project to an external storage device (e.g. MMC card or

flash drive), a subdirectory (not the root) must be used as the working path.
Otherwise, the upload may fail.

“Project and Firmware” Window – Project Tab

The

Firmware

tab of the “Project and Firmware” window (refer to illustration

below) displays the

Current Loaded Firmware

and also has a

Load New Firmware

section.

“Project and Firmware” Window – Firmware Tab

•

Isys

12” Tilt Touch Screen: TPMC-12

Operations Guide – DOC. 6675C

Summary of Contents for n TPMC-12







































































Search results

Summary of Contents for n TPMC-12

Reviews:

Related manuals for n TPMC-12

Brands by name

Popular brands

Crestron n TPMC-12, Operation Manual

Search results

Summary of Contents for n TPMC-12

Reviews:

Related manuals for n TPMC-12

Brands by name

Popular brands