MiniTouch Color RF Wireless Handheld
Crestron
MT-500C
“Project Properties” Window (Hard Keys Tab)
The graphic below shows the digital join numbers for each hardkey. Hardkeys 5 – 9
can be programmed in SIMPL Windows to perform, for example, volume up/down or
power on functions for a device, but cannot be programmed in VT Pro-e to do page
flips. For more information on digital joins for the MT500C, refer to the SIMPL
Windows online help.
Digital Joins for Hardkeys
Loading a VT Pro-e Project
Before loading a VT Pro-e project, the serial cable supplied with the MT-500C must
be connected to the unit and the PC’s serial port. The graphics on the next page show
the two ways to plug the serial cable: directly in the MT-500C or in the docking
station that has a MT-500C docked to it.
NOTE:
You cannot operate the MT-500C while a file is loading.
NOTE:
If you load a file using VT-Pro-e, the software automatically sets the baud
rate to 115200.
16
•
MiniTouch Color RF Wireless Handheld
Operations Guide – DOC. 6101
