MiniTouch Color RF Wireless Handheld
Crestron
MT-500C
NOTE:
You cannot adjust the Button Light delay to be greater than the LCD delay.
You cannot adjust the LCD delay to be less than the Button Light delay. For
example, if the LCD delay is 10 sec. and the Button Light delay is 4 sec., once you
try and increase the Button Light delay to be greater than the LCD delay, the LCD
delay will automatically increase to match the Button Light delay.
Press the
down
button to display setup panel 2 (refer to graphic below).
Setup Panel 2
Setup Panel 2 Functions/Adjustments
Setting
Function
Adjustment
Indicates free memory
available.
Not applicable.
Turns on or off the option
to activate MT-500C by
picking it up.
Tap button to toggle
function.
Adjusts sound level (3
levels, default is level 2) or
turns off touchscreen beep.
Tap button to change
level.
Adjusts sound level (3
levels) or turns off fixed
button beep. Default is off.
Tap button to change
level.
Activates calibration screen. Tap button. Follow
directions on screen.
NOTE
: Activating the pickup sensor option can result in reduced battery operating
time. Tap
to return the display to the logo page (exits setup).
Maintaining the MT-500C
The following lists important information to help you maintain the MT-500C.
Take care not to scratch the touchscreen
. Use your finger to tap the touchscreen or
use plastic-tipped pens intended for use with a touchscreen.
Keep the MT-500C away from heat sources
.
Do not expose MT-500C to rain or excessive moisture
. If you spill water on the
MT-500C, remove battery pack and allow unit to dry for 48 hours before replacing
battery pack.
Do not drop MT-500C or subject unit to hard impact
.
10
•
MiniTouch Color RF Wireless Handheld
Operations Guide – DOC. 6101
