Mud Mount Kits
Crestron
MMK-V15 & WMKM-V15
NOTE
: The MMK-V15 has been optimized for mounting in 5/8” (15 mm) drywall.
You may use 1/2” – 1” (12.5 – 25 mm) without issue. Thinner or thicker drywall will
cause issues with the installation.
NOTE:
The illustrations in this procedure show the installation of the MMK-V15
with the PMK-V15. Even though the illustrations only show the PMK-V15, the
procedure is identical for the BB-V15.
1. Pass an adjustment plate through the opening and align its two center holes
with the top two pins on the PMK-V15 (or BB-V15). Verify that the pins on
the adjustment plate are not between (facing) the adjustment plate and the
PMK-V15 (or BB-V15). Refer to the illustration below for visual guidance.
Secure Adjustment Plates to PMK-V15 (or BB-V15)
PMK-V15
(2024092)
PUSH-ON FASTENER (4)
(2004121)
ADJUSTMENT PLATE (2)
(2004825)
2. Slide a push-on fastener over each pin of the PMK-V15 (or BB-V15) to
loosely secure the adjustment plate and the mounting plate. Do not push the
push-on fasteners all the way down onto the pins. Slide them on enough to
keep the adjustment plate and mounting plate as one adjustment/mounting
plate assembly.
6
•
Mud Mount Kits: MMK-V15 & WMKM-V15
Installation Guide – DOC. 6885A