Crestron
TPS-12G/15G/17G-QM
Isys
®
G-Series Touchpanels
Diagnostics Menu
Touch
Diagnostics
on the MAIN MENU to access the DIAGNOSTICS MENU,
which contains controls for diagnostic tools. The diagnostic tools should only be
used under supervision from a Crestron customer service representative during
telephone support. The options available from the DIAGNOSTICS MENU are
numeric in nature and their interpretation is beyond the scope of this manual.
DIAGNOSTICS MENU
Hardware Hookup
Ventilation
The TPS-12G/15G/17G-QM should be used in a well-ventilated area. The venting
holes should not be obstructed under any circumstances.
To prevent overheating, do not operate this product in an area that exceeds the
environmental temperature range listed in the table of specifications. Consider using
forced air ventilation to reduce overheating.
Connect the Device
Make the necessary connections as called out in the illustration on the following
page. Refer to “Network Wiring” on page 20 before attaching the 4-position terminal
block connector. Apply power after all connections have been made.
When making connections to the TPS-12G/15G/17G-QM, consider the following:
•
Use Crestron power supplies for Crestron equipment.
•
The included cable cannot be extended.
Operations Guide – DOC. 6415B
Isys
®
G-Series Touchpanels: TPS-12G/15G/17G-QM
•
45
Summary of Contents for Isys TPS-12G-QM
Page 4: ......
