background image

42LG70

42” CLASS LCD 1080P HDTV

(42.0” diagonal)

•  Full HD 1080p Resolution
•  40,000:1 Dynamic Contrast Ratio
•  TruMotion 120Hz
•  4x HDMI

 V.1.3 with Deep Color

•  Intelligent Sensor
•  24p Real Cinema
•  AV Mode (Cinema, Sports, Game)
•  Clear Voice
•  LG SimpLink

 Connectivity

•  Invisible Speaker System
•  USB 2.0 (JPEG, MP3)
•  ISFccc

FULL HD 1080P RESOLUTION

Displays HDTV programs in full 1920 x 1080p resolution for a more detailed picture.

INTELLIGENT SENSOR

Unlike other sensors which can only sense brightness of ambient light, LG’s “Intelligent Sensor” uses 4,096 sensing steps to evaluate its 
surroundings.  Using a sophisticated algorithm, the LG processes picture quality elements including brightness, contrast, color, sharpness 
and white balance.  The result is a picture optimized for it’s surroundings, more pleasing to watch and which can also save up to 50% in 
power consumption.

24P REAL CINEMA

Hi-def movies run at the 24 frames per second speed that they were originally filmed in, making your home-cinema experience one step 
closer to a “Real Cinema” experience.

CLEAR VOICE TECHNOLOGY

Automatically enhances and amplifies the sound of human voice frequency range to provide high-quality dialogue when background noise swells.

LG SIMPLINK

Allows for convenient control of other LG SimpLink products using the existing HDMI connection.

Summary of Contents for 42LG70 Series




















































































Reviews: