iMedia Receiver/Processor with Video
Crestron
IM-RXV1 & IM-RXV3
Specifications
Specifications for the IM-RXV1 & IM-RXV3 are listed in the following table.
IM-RXV1 & IM-RXV3 Specifications
SPECIFICATION DETAILS
Outputs
RGB
Gain
Resolution
Video
Gain
Formats
Audio
(Line-Level)
Output
Level
Output
Impedance
Frequency
Response
Signal-to-Noise
Ratio
Total Harmonic Distortion
+ Noise
Speaker
Output
Power
Frequency
Response
Signal-to-Noise
Ratio
Total Harmonic Distortion
+
Noise
Infrared/Serial
IR
output
Relay
Rating
0 dB (75 ohm termination)
1024 x 768 @ 60Hz with maximum cable
length of 84 feet, 1600 x 1200 @ 60Hz with
maximum cable length of 34 feet; refer to
“Video Resolution and Cable Length” on
page 12 for other resolutions
0 dB (75 ohm termination)
480i (NTSC), 576i (PAL)
4 V
RMS
balanced, 2 V
RMS
unbalanced
200 ohms balanced, 100 ohms unbalanced
20 Hz to 20 kHz ±0.5 dB
82 dB, 20 Hz to 20 kHz, A-weighted
0.05%, 20 Hz to 20 kHz
10 Watts Per Channel (x2) into 8 ohms
(minimum impedance)
20 Hz to 20 kHz ±1 dB
80 dB, 20 Hz to 20 kHz, A-weighted
0.7%, 20 Hz to 20 kHz
(1) mini-phone jack, IR/Serial port;
Up to 1.2 MHz
(2) Normally open, isolated relays;
2A, 50V AC/DC; MOV arc suppression
across contacts
Inputs
IM
Digital
Input
Impedance
Logic
Threshold
IM-RXV1: (1) IM port connects to IM output
of IM transmitter devices
IM-RXV3: (3) IM ports connect to IM output
of IM transmitter devices
(4) digital inputs; Rated for 0-24V DC,
referenced to GND;
2k ohms pulled up to 5V DC
2.5V DC nominal
(Continued on following page)
4
•
iMedia Receiver/Processor with Video: IM-RXV1 & IM-RXV3
Operations & Installation Guide – DOC. 6478
