Crestron
IM-RXV1 & IM-RXV3
iMedia Receiver/Processor with Video
Connectors, Controls, & Indicators
# CONNECTORS,
CONTROLS, &
INDICATORS
CONTROLS, &
INDICATORS
DESCRIPTION
DESCRIPTION
1 POWER
INPUT
Power connector require 3.0 A @ 18 VDC
from included power supply.
2
PWR LED
Indicates power from the included power
supply.
3 SOFTWARE
RESET
Recessed below the front panel. Press this
button while the system is running to restart
the program.
4
RELAY OUTPUT
(2) Normally open isolated relays; rated to
2A, 50V (AC/DC) with MOV arc suppression
across contacts for control of “real world”
loads. A nine-pin terminal block interface
connector is included.
5 INPUT
(4) Digital inputs. Connect to 24 VDC (max)
logic output or contact closure from external
devices. A five-pin terminal block interface
connector is included.
6
INPUT LED
Indicates when an input signal is received on
any of the four digital inputs.
7
IR LED
Indicates when an output signal is
transmitted from the IR OUT port.
8
IR OUT
(1) 3.5mm tip-ring-sleeve (TRS) mini-phone
port enables infrared communications to
other devices; Use Crestron Infrared Emitter
Probe (part number STIRP, sold separately)
for controlling infrared devices.
Tip: IR Data Out
Ring: No Connection
Sleeve: Ground
9 COMPUTER
One 6-pin RJ-11 female, computer console
port. Use with STCP-502 serial cable (not
included).
PIN FUNCTION PIN
FUNCTION
1
CTS
4
TXD
2
GND
5
RTS
3
RXD
6
No Connect
Tip
Ring
Sleeve
(Continued on following page)
Operations & Installation Guide – DOC. 6478
iMedia Receiver/Processor with Video: IM-RXV1 & IM-RXV3
•
7
