High-Definition Video Scaler
Crestron
HD-SCALER
14
•
High-Definition Video Scaler: HD-SCALER
Operations & Installation Guide – DOC. 7136B
Setup
Network Wiring
When wiring the Cresnet network, consider the following:
•
Use Crestron Certified Wire.
•
Use Crestron power supplies for Crestron equipment.
CAUTION:
Failure to use Crestron power supplies could cause equipment
damage or void the Crestron warranty.
•
Provide sufficient power to the system.
CAUTION:
Insufficient power can lead to unpredictable results or damage
to the equipment. Use the Crestron Power Calculator to help calculate how
much power is needed for the system (
For Cresnet networks with 20 or more devices, use a Cresnet Hub/Repeater
(CNXHUB) to maintain signal quality.
For more details, refer to “Check Network Wiring” on page 28.
Identity Code
NOTE:
The latest software can be downloaded at
The Net ID of the HD-SCALER has been factory set to
A3.
The Net IDs of multiple
HD-SCALER devices in the same system must be unique. Net IDs are changed from
a personal computer (PC) via Crestron Toolbox™ (refer to “Establishing
Communication” on page 18).
When setting the Net ID, consider the following:
•
The Net ID of each unit must match an ID code specified in the Crestron
Studio™ or SIMPL Windows program.
•
Each network device must have a unique Net ID.
For more details, refer to the Crestron Toolbox help file.