Crestron
HD-SCALER
High-Definition Video Scaler
Operations & Installation Guide – DOC. 7136B
High-Definition Video Scaler: HD-SCALER
•
25
Configuration
Configuration of input and output signals is performed from the HD-SCALER OSD
using the supplied IR remote. For information about the remote, refer to “IR Remote
Operation” on page 20.
Configuring Analog Input Parameters
To configure analog input parameters, navigate to the
Analog Input
main menu item
and then press
OK
on the IR remote.
The
Analog Input
submenu appears as shown below.
Analog Input Submenu
The
Analog Input
submenu allows configuration of the following parameters:
•
Auto Calibrate:
Automatically centers the image on the display.
•
Contrast:
Adjusts the contrast level of the video signal.
•
Brightness:
Adjusts the brightness level of the video signal.
•
Horizontal Position:
Adjusts the horizontal positioning of the video signal.
•
Vertical Position:
Adjusts the vertical positioning of the video signal.
•
Phase - Coarse:
Adjusts the coarse phase level of the video signal.
•
Phase - Fine:
Adjusts the fine phase level of the video signal.
•
Color - Red:
Adjusts the red color component of the video signal.
•
Color - Green:
Adjusts the green color component of the video signal.
•
Color - Blue:
Adjusts the blue color component of the video signal.
•
EDID:
Specifies whether the analog input EDID is to be set to the default
EDID of the display or copied (cloned) from the output EDID of the
display.