CRESTRON GREEN LIGHT
®
EXPRESS
Power Switching Cabinet GLPX-HSW-FT
Control Wiring (Section B)
The bottom of the cabinet contains Cresnet connections for interfacing to the rest of the Crestron control system
and a power port to provide an alternate source of 24 volt power to the modules. It also provides an override input
which can be tied to devices such as the GLS-PLS-120/277 phase-loss sensor, or other devices that provide a dry
contact
®
®
,
closure (manual switch, fire alarm relay, etc.).
NOTE:
Interface connectors for
NET
(x2),
POWER
(x1), and
OVERRIDE
(x3)
ports are provided.
Wire Gauge and Torque Values
TERMINAL CONNECTOR
MAX
TORQUE STRIP
WIRE RANGE
LENGTH
NET
-12
AW
43 lb-in
.5 Nm)
26
G
4.
(0
1/4”
(6 mm)
POWER
26-12 AWG
4.43 lb-in
(0.5 Nm)
1/4”
(6 mm)
OVERRIDE 26-12
AWG
4.4
(0.5 Nm)
3 lb-in
1/4”
(6 mm)
Connector Wiring
RE
D
WHI
T
E
BL
U
E
BL
A
C
K
NET:
TO CONTROL SYSTEM AND
OTHER CRESNET DEVICES
RE
D
WHI
T
E
BL
U
E
BL
A
C
K
POWER:
PROVIDES CRESNET
LES
POWER TO THE MODU
OVERRIDE:
FROM OTHER CABINET;
FROM ALARM, ETC.
(OPTIONAL); TO OTHER
CABINET(S) IF NECESSARY
MODULES:
TO GLXP MODULES
(PREWIRED)
Installation Guide – DOC. 6888B
GREEN LIGHT
®
EXPRESS Power Switching Cabinet GLPX-HSW-FT
•
9
