CRESTRON GREEN LIGHT
®
EXPRESS
Power Switching Cabinet GLPX-HSW-FT
Wiring
NOTE:
All wiring must be installed in accordance with all local and national electrical codes.
NOTE:
Refer to the torque settings specified on pages 8 and 9.
CRE
GLXP low profile switching modules installed.
The follo
e cabinet:
•
and
N
input terminals and connect loads to
SW
output
•
Connect control wiring (section
B
of the following diagram)
STRON GREEN LIGHT EXPRESS cabinets are shipped with
wing must be performed after mounting th
Connect incoming feed conductors to the
L
terminals (section
A
of the following diagram)
FEEDS
A
B
CLASS 2
WIRING ONLY
FROM
BREAKER
PANEL
TO
LOADS
FEEDS
FROM
BREAKER
PANEL
TO
LOADS
SERVICE
SCREWDRIVER
Installation Guide – DOC. 6888B
GREEN LIGHT
®
EXPRESS Power Switching Cabinet GLPX-HSW-FT
•
7
