Install the Bezel
Place the bezel onto the FT2-ELEC assembly so that the retractable lid
fits inside the bezel opening. The bezel is held in place using magnets.
Operate the Cable Retractor Button
Press the cable retractor button to retract the cable back into its seat.
The LED backlight provides the cable connector status.
l
Solid: The cable retracted successful.
l
Flashing: The cable did not fully retract after the cable retractor
button was pressed. Remove obstruction to free cable. Once the cable
connector returns to its seat within the module, the LED indicator
stops flashing and returns to solid.
9
FT2A-CBLR-1T Series
Quick Start
FlipTop™ One-Touch Cable Retractors
