Install the USB-C® Power Adapter
FT2A-CBLR-1T-USBC-PWR Only
The FT2A-CBLR-1T-USBC-PWR is a USB-C® to USB-C power module
that supports device charging only. The male USB Type-C® connector
must connect to a 60 W USB-C power adapter (not included). To attach a
USB-C adapter to the FT2-ELEC assembly, use the included reclosable
fastener strips. One fastener strip is placed on the FT2-ELEC assembly
and the other strip is placed on the adapter.
NOTES:
l
This procedure is intended for the FT2A-CBLR-1T-USBC-PWR
retractor only.
l
When preparing to attach the fastener strips to the USB-C
adapter and FlipTop assembly, make sure that there will be
enough room on the enclosure to also attach an
FT2A-UTK-PWS power supply or another FlipTop accessory
beside the adapter.
3
FT2A-CBLR-1T Series
Quick Start
FlipTop™ One-Touch Cable Retractors
