Crestron
e-Schedule
Programmer’s
Guide
Serial Signals
i1
Source Name: The name of the source device (i.e.,
VCR-1
), as entered into
the configuration database.
i2
Current Media: The media title (such as a movie or CD) that is currently
physically loaded into the source device, based on the scheduling
information. (See
i3
, below).
i3
Media Name: The media title that
should
be loaded into the source device for
the next event, based on the scheduling information. (When an event is over
and the end user physically changes the media in a source device, the
READY button must be pressed. This re-initializes
analog o1
to READY
and the next media title is posted.)
NOTE
: Logic can be written in the control system to compare the "should
be" media title (
serial i2
) to the "currently loaded" one (
serial i3
), and if they
are different, to send the "NOT READY" value (identified by
analog
o1
).
Programmer’s Guide
e-Schedule – DOC. 5919
•
47
