Crestron
e-Schedule
Programmer’s
Guide
Diagnostic Utilities
The Configuration menu of the Real-Time Engine application window
includes two options for debugging,
Watch Signals
and
Configuration
.
Watch Signals
The
Watch Signals
window displays information about all the signals that
the Real-Time Engine receives and transmits. As stated previously, all
signals are defined as either input to the Scheduler or output from the
Scheduler, and this is specified in the
I/O
field. The
IO Type
field gives the
type of signal—digital, analog or serial. The
Value
field gives the value that
was sent.
Command Type
lists the type of target location for the command.
This should match the
Which CNX
field that displays the CNX Interface.
Handle
lists the CNX Gateway connection handle. The Watch Signals
window also gives the join number and description of all commands.
NOTE
: The “Watch Signals” window should only be used for debugging,
since the system slows down dramatically when this window is open.
Programmer’s Guide
e-Schedule – DOC. 5919
•
29
