Crestron
DM-RX1-1G
DigitalMedia™
CAT
Receiver
“D” Cable (Stripping the Outer Jacket)
Outer Jacket
Foil Shield
2 1/2 in
(64 mm)
1/2 in
(13 mm)
Foil Shield
Wire Braid, Twisted
Outer Jacket
4.
Trim foil shield to 1/2 inch (13 mm).
5.
Remove the white neoprene sheath and separate the twisted pairs
to expose the spline. Cut the spline so that it is near flush with the
foil shield as shown in the following illustration. Return twisted
pairs to original position.
“D” Cable (Cutting the Spline)
Cut Spline To Here
6.
Neatly wrap the twisted braid around the foil shield as shown in
the following illustration. Only the silver side of foil shield is
conductive.
Operations & Installation Guide – DOC. 6969B
DM
®
CAT Receiver: DM-RX1-1G
•
15
