Crestron DM-NAX-8ZSA Product Manual Download | Manualshive

Page: 54 / 68

background image

50 • DM-NAX-8ZSA

Product Manual — Doc. 9045A

To configure port selection:

1. To enable the port selection, move the Port Selection slider to the right position. To disable

the port selection, move the slider to the left position. By default, Port Selection is
disabled.

2. With the port selection enabled, select an Ethernet port from the Management drop-

down menu to assign traffic type.

NOTE:

The Management port controls your connection to the web interface. Changing

the port value will result in losing your connection to the device via the web interface.

3. With the port selection enabled, select an Ethernet port from the Audio/NAX drop-down

menu to assign traffic type.

4. Click Save changes to apply the new settings.

«
...
52
53
54
55
56
...
»

Summary of Contents for DM-NAX-8ZSA





































































Reviews:

No comments

Related manuals for DM-NAX-8ZSA

Brand: 5Core Pages: 2

Brand: B&K Pages: 9

Brand: Pangea Pages: 7

Brand: Xantech Pages: 16

Brand: Xantech Pages: 44

Brand: Xantech Pages: 2

Brand: Xantech Pages: 102

Brand: Xantech Pages: 36

Brand: ZABKZ Pages: 4

Brand: QSC Pages: 8

Brand: AR Pages: 56

Brand: Alesis Pages: 16

Brand: Technics Pages: 100

Brand: Biamp Pages: 13

Brand: PrimaLuna Pages: 20

Brand: Takstar Pages: 2

Pocket Rockit V1b

Brand: C-Tech Pages: 6

Brand: PROCEED Pages: 30

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands