Crestron DM-NAX-8ZSA Product Manual Download

Page: 41 / 68

Product Manual — Doc. 9045A

DM-NAX-8ZSA • 37

Signal (Autosaved)

The Signal (Autosaved) section displays the Signal and Clipping status.

If the signal is present but not clipping, then the Signal status changes to Present in green
and Clipping status changes to None in green.

If both signal and clipping are present, then the Signal status changes to Present in green
and Clipping status changes to Present in red.

If there is no signal or clipping, then the Signal status changes to Not Present in red and
Clipping status changes to None in green.

Configure Bussing Volume Offset (Autosaved)

1. To configure the bussing volume offset, do one of the following:

Move the Bussing Volume Offset slider to the right to increase or to the left to
decrease the bussing volume offset.

Click the db arrows to increase or decrease the bussing volume offset. Values range
from -12 db to 12 db, adjustable in 1 db increments.

Manually enter a value in the Bussing Volume Offset field.

Summary of Contents for DM-NAX-8ZSA





































































Search results

Summary of Contents for DM-NAX-8ZSA

Reviews:

Related manuals for DM-NAX-8ZSA

Brands by name

Popular brands

Crestron DM-NAX-8ZSA, Product Manual

Search results

Summary of Contents for DM-NAX-8ZSA

Reviews:

Related manuals for DM-NAX-8ZSA

Brands by name

Popular brands