Crestron DM-NAX-8ZSA, Product Manual

Page: 44 / 68

40 • DM-NAX-8ZSA Product Manual — Doc. 9045A
Configure Equalizer Settings (Autosaved)
1. Move the Speaker EQ Enabled slider to the right position to enable the speaker EQ. Move
the slider to the left position to disable the speaker EQ.
NOTE: When the Speaker EQ Enabled is disabled, all bands of the equalizer will be
bypassed to allow for A/B testing of the entire EQ curve.
2. With the Speaker EQ Enabled slider in the right position, do the following to configure
Band01 to Band10:
a. To configure the gain, do one of the following:
l
Move the Gain slider up to increase or down to decrease the gain.
l
Click the arrows to increase or decrease the gain. Values range from -40 to
20, adjustable in 0.1 increments.
l
Manually enter a value in the Gain field.
b. Select the type from the Type drop-down menu. Values are EQ, Notch, TrebleShelf,
BassShelf, LowPass, and HighPass.
c. To configure the frequency, do one of the following:
l
Click the arrows to increase or decrease the frequency. Values range from
20Hz to 20kHz, adjustable in 1Hz increments.
l
Manually enter a value in the Frequency field.
d. To configure the bandwidth, do one of the following:
l
Click the arrows to increase or decrease the bandwidth. Values range from 0.1
octaves to 4.0 octaves, adjustable in 0.1 octave increments.
l
Manually enter a value in the Bandwidth field.