DigitalMedia™ CAT & Fiber Transmitters 300N
Crestron
DM-TX-300N/-F
Programming Software
Have a question or comment about Crestron software?
Answers to frequently asked questions (FAQs) can be viewed in the Online Help
section of the Crestron website. To post a question or view questions you have
submitted to Crestron’s True Blue Support, log in at
First-time users will need to establish a user account.
Earliest Version Software Requirements for the PC
NOTE:
Crestron recommends that you use the latest software to take advantage of
the most recently released features. The latest software is available from the Crestron
website.
Crestron has developed an assortment of Windows
-based software tools to develop
a controlled DigitalMedia system. For the minimum recommended software
versions, visit the Version Tracker page of the Crestron website
(
www.crestron.com/versiontracker
Programming with SIMPL Windows
SIMPL Windows is Crestron’s premier software for programming Crestron control
systems. It is organized into two separate but equally important “Managers”.
Configuration Manager
Configuration Manager is the view where programmers “build” a Crestron control
system by selecting hardware from the
Device Library
.
In the examples shown on the following pages, the DM-TX-300N and
DM-TX-300N-F are being used in a DigitalMedia system with a DM-MD8X8
Switcher, equipped with a DMC-CAT input card (for the DM-TX-300N) or a
DMC-F input card (for the DM-TX-300N-F). For details, refer to the latest version
of the DigitalMedia Switchers Operations Guide (Doc. 6755).
1. To incorporate the DM-TX-300N/-F into the system, drag the
DM-TX-300N/-F from the DigitalMedia | DM Transmitters folder of the
Device Library
and drop it in the
System Views.
26
•
DigitalMedia™ CAT & Fiber Transmitters 300N: DM-TX-300N/-F
Operations Guide – DOC. 6907D
