DigitalMedia™ CAT & Fiber Transmitters 300N
Crestron
DM-TX-300N/-F
Hardware Hookup
Make the necessary connections as called out in the illustration that follows this
paragraph. Refer to “Network Wiring” on page 19 before attaching the 4-position
terminal block connector. Apply power after all connections have been made.
When making connections to the DM-TX-300N/-F, note the following:
•
Use Crestron power supplies for Crestron equipment.
•
The included cable cannot be extended.
Hardware Connections for the DM-TX-300N
LAN:
10BASE-T / 100BASE-TX
Ethernet to LAN
HDMI IN:
Digital Video /
Audio Input
IR:
To IR Device (e.g. Projector)
or Devices Without RS-232
DM OUT, D & M:
To DM Switcher, Receiver
or Other DM Device
Ground
DM OUT, 24 A B G:
To DMNet Port of Switcher, Receiver or Other
DM Device and External Power Supply
COM:
To Any RS-232
Device
HDMI OUT:
Digital Video /
Audio Output
DVI IN:
DVI, RGB or
Component
Video Input
AUDIO IN:
Balanced or Unbalanced
Stereo Line Level Inputs
AUDIO IN, SPDIF:
Coaxial Digital Audio
Input
AUDIO IN, L & R:
Unbalanced Stereo
Line Level Input
VIDEO IN:
Component, S-video or
Composite Input
22
•
DigitalMedia™ CAT & Fiber Transmitters 300N: DM-TX-300N/-F
Operations Guide – DOC. 6907D
