DigitalMedia™ CAT & Fiber Transmitters 300N
Crestron
DM-TX-300N/-F
6. The
DM OUT
port consists of two separate RJ-45 connectors labeled
D
and
M
. The
D
port carries
HDMI signal. The
M
port carries data. Refer to the following table for the connector pinouts.
D and M Ports
1
8
PIN #
WIRE COLOR
PIN #
WIRE COLOR
1
Orange/White
5
Blue/White
2
Orange
6
Green
3 Green/White
7 Brown/White
4
Blue
8
Brown
7. For DigitalMedia CAT wiring, use DM-CBL DigitalMedia Cable. Do NOT use low skew cable. Up to
two DM Repeaters (model DM-DR, sold separately), may be required. Refer to the latest version of
the Crestron DigitalMedia Design Guide (Doc. 4789) for complete wiring guidelines.
8. DMNet wiring is not compatible with Cresnet wiring. DMNet wiring cannot be daisy chained.
9. Refer to the following table for the
24 A B G
connector pinouts.
24 A B G Port
24
G
A B
PIN #
SIGNAL
DESCRIPTION
WIRE COLOR
24
24V DC
DC Power
Red
A
DMNet+
DMNet
Orange
B DMNet-
DMNet
Grey
G
Ground
DC Ground
Black
10. DM-TX-300N-F only.
11. The
DM OUT
port consists of two separate fiber optic SC type connectors, labeled
D
and
M
. The
D
port carries HDMI signal. The
M
port carries data.
12. For DigitalMedia fiber wiring, use CresFiber or other quality duplex multimode fiber optic cable.
Refer to the latest version of the Crestron DigitalMedia Design Guide (Doc. 4789) for complete
wiring guidelines.
18
•
DigitalMedia™ CAT & Fiber Transmitters 300N: DM-TX-300N/-F
Operations Guide – DOC. 6907D
