DigitalMedia™ Room Controller, CAT
Crestron
DM-RMC-100-1
Configuration
Manager
Configuration Manager is the view where programmers “build” a
Crestron control system by selecting hardware from the
Device Library
.
1.
To incorporate the DM-RMC-100-1 into the system, drag the
DM-RMC-100-1 from the DigitalMedia | DM Receivers folder of
the
Device Library
and drop it into either of the following
System
Views
:
•
A compatible output card of a DM switcher
•
Directly to a card in the Ethernet slot of the control system
(used without a DM switcher)
Locating the DM-RMC-100-1 in the Device Library
The system tree of the control system displays the
DM-RMC-100-1 in the appropriate slot with a default IP ID or IP
ID as shown in the following illustrations. In the first example, the
DM-RMC-100-1 is used with the DMCO-22 output card in a
DM-MD8X8 switcher (both sold separately). In the second
example, the DM-RMC-100-1 is used with the C2ENET-2 card
(sold separately) in an Ethernet slot on the control system.
24
•
Room Controller, CAT: DM-RMC-100-1
Operations & Installation Guide – DOC. 6743-2G
