DigitalMedia™ Room Controller, CAT
Crestron
DM-RMC-100-1
Firmware
Firmware files may be distributed from programmers to installers or from
Crestron to dealers. Firmware upgrades are available from the Crestron
Web site as new features are developed after product releases. For details
on upgrading, refer to the Crestron Toolbox help file.
Check the Crestron Web site to find the latest firmware. (New users may
be required to register to obtain access to certain areas of the site,
including the FTP site.)
To upgrade DM-RMC-100-1 firmware:
1.
Do either of the following:
•
If the DM-RMC-100-1 is connected to a DM switcher, use the
Device Discovery Tool in Crestron Toolbox to find the IP
address of the switcher.
•
If the DM-RMC-100-1 is being used in standalone
configuration (i.e. without a DM switcher), use the Device
Discovery Tool to find the IP address of the DM-RMC-100-1.
2.
Add the IP address to the Address Book in Toolbox.
3.
Download the appropriate .puf file from the Crestron Web site to
your PC.
4.
Double-click the .puf file. The Toolbox Address Book will open.
5.
From the list in the Address Book, select the DM switcher (if the
DM-RMC-100-1 is connected to a switcher) or the
DM-RMC-100-1 (if the DM-RMC-100-1 is used in a standalone
configuration), then click
OK
.
Either of the following occurs:
•
If the DM switcher was selected, a DM device list is displayed
that allows upgrading all DM devices connected to the
switcher.
•
If the DM-RMC-100-1 was selected, a DM device list is
displayed that allows upgrading of the DM-RMC-100-1 only.
In the DM device lists that are displayed, the checkbox of any item
that needs to be upgraded is automatically selected.
6.
Click
Update
.
7.
After the process is complete, click
Recheck
to verify the upgrade.
30
•
Room Controller, CAT: DM-RMC-100-1
Operations & Installation Guide – DOC. 6743-2G
