Software
Crestron
D3 Pro
™
User Interfaces
If a user interface in your lighting program is a keypad or touchpanel with feature
buttons, a graphic of the panel will be displayed in the center of the screen when you
select it.
You can program the hard buttons simply by clicking the individual button. This will
display programming options on the right side of the screen.
If the interface is a touchpanel you can access the touch screen page layouts by
clicking the
Launch VTPro-e
button. This will start VisionTools Pro-e, Crestron's
touchpanel design software, and generate the touchpanel project if it has not already
been generated.
To view information about the project as it's being generated, select
Build Status
on
the
View
menu. General information items are marked by icons; a successful
compile message is marked by a
icon.
Sometimes warnings are generated, signifying that not all buttons in the project could
be linked to device commands. These warnings are marked by
icons. Here you
can double-click a warning to go directly to that page.
48
•
Crestron D3 Pro™
Reference Guide – DOC. 5998a
