4. Push the roller shade assembly toward the idler bracket to compress
the spring on the idler pin and align the latch on the motor to the posts
on the bracket.
Align the Motor with the Motor Bracket
5. Push the tab on the motor assembly into the hole in the motor
bracket. When the shade is properly seated, the two clips spring down
to secure the motor to the bracket. Make sure that the shade is
properly mounted before letting go.
Align the Motor with the Motor Bracket
Mount the Roller Shade Assembly (With an In-Line Coupler)
A coupled roller shade assembly consists of two or more roller shade
assemblies (bands) that interlock and secure each other. The bands are
supported using a coupler bracket. There is a motor band, an idler band,
and (optionally) one or more intermediate bands.
l
The motor band has a retractable pin on one side and the motor on the
other.
l
The intermediate band has a retractable pin on one side and a hole in
the other end that accepts a retractable pin.
l
The idler band has an idler pin on one side and a hole in the other end
that accepts a retractable pin.
The retractable pin traverses the bearing in the coupler bracket, which
provides support for the adjoining bands. The pin, when fully inserted into
the next band, provides control to the attached band.
The retractable pin is adjusted by rotating the ring marked EXTEND and
RETRACT. Use the spanner wrench to rotate the ring. The retractable pin
has detents that allow it to be adjusted to three predetermined positions.
Pin Positions
5
CSA-DECOR5 Series
Quick Start
Shade Motor Bracket Installation and Motor Programming
