Mount the Roller Shade Assembly
CAUTIONS:
l
There is risk of personal injury and equipment damage if the shade or
associated parts fall during installation. Use care when mounting.
Use proper mounting hardware (e.g., screws or bolts) for the
mounting surface when securing the brackets to the surface.
l
Proper installation of shades requires two or more people. Large
shades and medium-sized coupled shades will require three people.
Once the mounting brackets are installed, mount the roller shade
assembly:
Mount the Roller Shade Assembly (Without a Coupler)
1. Use a Phillips screwdriver and the supplied screws to mount the quick-
release latch to the motor.
NOTES:
l
The latch must be oriented so that the release levers are pointing
in the same direction as the buttons.
l
When mounted to the motor, the raised side of the latch faces
the window jamb.
l
The latch must be seated flat against the motor head. To make
sure that the latch is seated properly, the holes in the latch must
be seated around the bosses on the motor head.
l
The nut must be installed after the latch is properly seated
against the motor.
Mount the Quick-Release Latch to the Motor
2. Insert the idler pin into the top of the keyhole on the right bracket, and
slide it down into the keyhole. The idler pin sits on the vertical
adjustment screw.
Insert the Idler Pin into the Keyhole
3. Raise the motor end of the roller shade assembly to the motor
bracket.
4
CSA-DECOR5 Series
Quick Start
Shade Motor Bracket Installation and Motor Programming
